You want to install a heating or cooling system and want to know which is the best system for your property?
Underfloor heating, radiator system, air conditioning. The choice is large and yet the individual key data of the property should be taken into consideration before a decision is made among the different systems. Let us advise you!
Underfloor Heating
Underfloor heating produces radiation heat and generates a kind of warm zone up to a height of 1.80 m.
This underfloor heating system provides a pleasant and extremely comfortable indoor climate even at low inlet temperatures. This makes underfloor heating a cost-effective and environmentally responsible heating system.
Compatible energy sources: Because of the comparatively low inlet temperatures of 33° to 40°, underfloor heating systems can be ideally combined with a heat pump or a thermal solar system.
Radiator System
The traditional heating system with radiators gives off radiant heat to the room via individual radiators.
Our aluminium radiators are manufactured to a high standard and offer the best quality and durability. The high heat output and energy efficiency ensure maximum heating cost reduction.
The selection of the radiator model depends as much on your own wishes as on the size and nature of the room. Special towel radiators that at the same time provide heat and serve as a towel dryer are suitable for bathrooms.
Self-regulating thermostatic valves allow the temperature of each room to be controlled individually.
The use of low-temperature radiators can also be operated with a heat pump.
Air Conditioner
The energy consumption for heating or cooling with air conditioners is relatively low, as around 3/4 of the heat output is gained from the outside air (heat pump principle). Air conditioners with heat pump function are therefore far more efficient than electric heaters. Both, Fan Coil or Split systems are operated by an outdoor unit (heat pump) and one or more inside units.
Fan coil units are equipped with a built-in heat exchanger through which cold or heated water flows as required. The cooling or heating medium is provided by an air/water heat pump.
On split systems the refrigeration fluid (gas) is charged with heat during the cooling cycle that will be pumped by the compressor outside the room. During the heating cycle heat will be brought in from the outside air and cold air will be pumped out.
With the inverter technology, the compressor is always on, but draws less power or more power depending on the temperature of the incoming air and the level set in the thermostat.
The operation of inverter units allows for significant energy savings, depending on the equipment and its characteristics, the savings range between 20-25%.
The intelligent and fully automatic control ensures optimum comfort anywhere in the house.
Chimney
In addition to a fast and targeted heat supply, fireplaces offer a special atmosphere.
Although the combustible or wood must be fed manually, the efficiency of combustible utilisation is very high at up to 70%.
With appropriate heating inserts, fireplace solutions can also be designed to heat the entire living area.
